Training/3D Printing Basics: Difference between revisions

From CreatorSpace Wiki Demo
Jump to navigation Jump to search
Seed CreatorSpace Wiki POC
 
Refresh CreatorSpace wiki demo content
 
Line 1: Line 1:
{{Training|Name=3D Printing Basics|Area=Digital fabrication|Status=Ready|Prerequisites=New member orientation|RelatedEquipment=[[Equipment/CS-EQ-0002]]|Summary=Sample training route for slicing, printer etiquette, and first print review.}}
{{Training|Name=3D Printing Basics|Area=Digital fabrication|Status=Review|Prerequisites=[[Training/3D Printing Room Onboarding]]|RelatedEquipment=[[Equipment/CS-EQ-3DP-001]], [[Equipment/CS-EQ-3DP-002]], [[Equipment/CS-EQ-3DP-003]], [[Equipment/CS-EQ-3DP-004]], [[Equipment/CS-EQ-3DP-005]]|Summary=General FDM and resin-aware 3D printing fundamentals for shared CreatorSpace equipment.}}
{{SeedNotice}}
{{SeedNotice}}
= 3D Printing Basics =
= 3D Printing Basics =


== Training Outcomes ==
== Core Concepts ==


* Choose a suitable starter print.
* Model source, license, and scale.
* Label a job.
* Slicer profile, printer profile, nozzle, layer height, infill, walls, supports, and bed adhesion.
* Recognize common failure modes.
* Filament or resin compatibility.
* Leave the machine ready for the next member.
* First-layer verification and early-stop decisions.
* Queue etiquette and cleanup.
* When to ask a steward instead of experimenting on shared machines.


== Starter Project ==
== First Independent Print Path ==


Try a small enclosure or cable clip before attempting large multi-hour prints.
# Complete [[Training/3D Printing Room Onboarding]].
# Choose a small PLA model from a public source or a trainer-approved file.
# Slice for the correct printer and material.
# Label the job.
# Watch the first layer.
# Remove the print safely and clean the station.
# Add a photo or note to [[Showcase/3D Printed Things]] if the result is useful.
 
== Equipment-Specific Next Steps ==
 
* Prusa Minis: beginner FDM signoff.
* Prusa XL: large/multi-tool workflow and longer-job policy.
* Conveyor belt printer: continuous production, belt adhesion, and long-part removal.
* Bambu Lab printers: [[Training/Bambu 3D Printing Basics]].
* Resin printers: PPE, ventilation, wash/cure, spills, and hazardous waste workflow.


[[Category:Training]]
[[Category:Training]]
 
[[Category:CreatorSpace POC]]

Latest revision as of 11:30, 20 September 2026

Proof of concept. This page is sample content for the CreatorSpace Wiki POC. It does not represent approved CreatorSpace policy, verified equipment instructions, or real member data.

3D Printing Basics

Core Concepts

  • Model source, license, and scale.
  • Slicer profile, printer profile, nozzle, layer height, infill, walls, supports, and bed adhesion.
  • Filament or resin compatibility.
  • First-layer verification and early-stop decisions.
  • Queue etiquette and cleanup.
  • When to ask a steward instead of experimenting on shared machines.

First Independent Print Path

  1. Complete Training/3D Printing Room Onboarding.
  2. Choose a small PLA model from a public source or a trainer-approved file.
  3. Slice for the correct printer and material.
  4. Label the job.
  5. Watch the first layer.
  6. Remove the print safely and clean the station.
  7. Add a photo or note to Showcase/3D Printed Things if the result is useful.

Equipment-Specific Next Steps

  • Prusa Minis: beginner FDM signoff.
  • Prusa XL: large/multi-tool workflow and longer-job policy.
  • Conveyor belt printer: continuous production, belt adhesion, and long-part removal.
  • Bambu Lab printers: Training/Bambu 3D Printing Basics.
  • Resin printers: PPE, ventilation, wash/cure, spills, and hazardous waste workflow.